tyre fitting near me
Tyre Fitting Near You, and What Good Fitting Looks Like
A tyre is only as good as the way it goes on the wheel. Here is what a proper fitting involves, so you can judge any fitter, and how we do it at your door.
- Tyres fitted at home or office
- Balanced and torqued to spec
- New valve with every tyre
- Card, cash, Tabby or Tamara
- Cash
- Card
- tabby
- tamara

Fitting is more than swapping rubber
Most tyre problems I am called out to are not faulty tyres. They are fitting faults: a bead that was never seated properly and leaks slowly, a directional tyre mounted backwards, a TPMS sensor snapped by the tyre machine, wheel nuts hammered on so hard they stretched the studs. None of these show on the day. They show a month later on the highway. That is why the fitting matters as much as the brand.
Our fitting standard, step by step
Lift at the right point
Jack on the manufacturer lift points, never on the sill or a suspension arm.
Break the bead carefully
Keeping clear of the TPMS sensor, which sits just behind the valve on most cars.
Clean the rim
Old rubber, corrosion and dirt removed from the bead seat so the new tyre seals.
New valve
Rubber valves harden in UAE heat. A new one costs little and prevents slow leaks.
Check direction and side
Directional and asymmetric tyres have to face the right way; the sidewall says ROTATION or OUTSIDE.
Lubricate and seat the bead
Proper paste, correct seating pressure, then down to running pressure.
Balance
On a computerised balancer, with weights placed neatly on alloys.
Torque the nuts
Snug by hand, then a torque wrench in a star pattern. No impact gun on final tightening.
Set pressures
To the door placard, adjusted for load if you tell us the car is often full.
Re-check
We suggest re-checking wheel nut tightness after the first 50 to 100 km.
Shortcuts to watch for at any fitter
- Old valves reused to save a few minutes
- Wheels not balanced, or balanced with weights hammered onto alloy faces
- Impact gun used to tighten nuts fully, which can warp brake discs
- Tyres fitted without checking the DOT date in front of you
- No pressure check on the spare, which is often the most neglected tyre on the car
Ask the fitter to show you the DOT code on each tyre before it goes on. A good fitter will not mind.
Getting tyres fitted at home
Our vans carry the same tyre changer and balancer as a workshop, so the standard above applies whether we fit in a villa driveway or a tower basement. You can supply your own tyres, in which case we charge labour from the starting price on this page, or we supply them through our tyre replacement service. Mobile fitting adds a call-out fee from AED 70 in Dubai.
| Fitting job | Starting price |
|---|---|
| Labour per tyre, your tyres | From AED 35 |
| Balancing | From AED 20 per wheel |
| Supply and fit | From AED 150 per tyre |
| TPMS sensor if needed | From AED 150 per sensor fitted |
Fitments that take longer
Some tyres need extra care and time. Run-flat tyres have stiff sidewalls that resist the machine. Low-profile tyres on 19 and 20 inch alloys leave little room between the lever and the rim. Large pickup and off-road tyres are heavy and need a careful bead seat. We quote the time and price when you send the size, so there are no surprises.
Not sure what tyres you have? The tyre size guide explains every code on the sidewall.
After the fitting
New tyres need a short bedding-in period. For the first 100 to 200 km the tread surface is slightly slick from the mould release agent, so brake and corner a little more gently. After that, a few habits keep the fitting doing its job.
- Re-check wheel nut tightness after the first 50 to 100 km.
- Check pressures cold after a week; new tyres can settle slightly. The tyre pressure guide has the figures for UAE heat.
- Book a wheel alignment if the car pulls or the steering wheel is off-centre.
- Plan a tyre rotation every 8,000 to 10,000 km, following the right rotation pattern for your car.
Tyre services we bring to you
Tyre Replacement
New tyres supplied and fitted at home or at a partner centre, from AED 150 per tyre fitted.
View serviceTyre Puncture Repair
Puncture fixed from inside with a plug-patch, at your location, from AED 40 per puncture.
View serviceWheel Alignment
Computer wheel alignment with before and after readings, from AED 80 per car.
View serviceMobile Tyre Fitting
Tyre fitting, repair and balancing at your home or office; call-out from AED 70 in Dubai.
View servicePopular sizes
Questions people ask
How much does tyre fitting cost near me?
Labour-only tyre fitting starts from AED 35 per tyre, with balancing from AED 20 per wheel. Supply and fit starts from AED 150 per tyre. A call-out from AED 70 applies for fitting at home in Dubai.
Can I get tyres fitted at home in Dubai?
Yes. Our vans fit tyres in driveways, building basements and office car parks across Dubai, Sharjah and Abu Dhabi, using the same type of machines a workshop uses.
Does tyre fitting include balancing?
Our supply-and-fit price includes balancing. For labour-only fitting of your own tyres, balancing is charged per wheel from AED 20. Every new tyre should be balanced.
Should the valve be replaced when fitting new tyres?
Yes. Rubber valves harden and crack in UAE heat, and replacing them at fitting time prevents slow leaks. TPMS valves have their own seals that should be serviced.
Do wheel nuts need re-tightening after tyre fitting?
It is good practice to re-check them after the first 50 to 100 km, especially on alloy wheels. We torque them to spec, but a re-check catches any settling.
Send your tyre size, get three prices
WhatsApp a photo of your tyre or your car model. We reply with a value, mid-range and premium option, fitted where you park.
- Cash
- Card
- tabby
- tamara
Browse tyres and services
Tyre services
Popular tyre sizes
Tyre brands
Tyres by car