Mobile tyre fitting in Dubai, Sharjah & Abu DhabiSplit any order into 4 with Tabby or Tamara +971 50 623 0997

Tyre service · Dubai, Sharjah, Abu Dhabi

Rim Repair for Kerb Rash, Bent and Damaged Alloys

We assess your damaged wheel and tell you straight whether it is cosmetic, repairable or unsafe. Car rim repair starts from AED 150 per rim; the final price depends on the damage and the finish.

  • Inspection of the rim for bends, cracks and runout
  • Cosmetic kerb rash repair on a painted or silver alloy
  • Tyre removal and refit, with the sensor protected
  • Balancing after the repair
4.9Google reviews
Pay with
  • Cash
  • Card
  • tabby
  • tamara
Rim Repair by mytyres.ae
Starting priceAED 150per rim

Same day for cosmetic repairs; one to two days for straightening or diamond-cut refinishing

Get my price

How rim repair works

  1. 1

    Send photos

    Photos of the damage, the wheel face and the size on the tyre sidewall.

  2. 2

    Initial assessment

    We tell you whether it looks cosmetic, bent or cracked, with a starting quote.

  3. 3

    Inspection off the car

    The tyre is removed and the rim checked for runout and hidden cracks before final price.

  4. 4

    Repair

    Refinish, re-machine or straighten, depending on the damage and the finish.

  5. 5

    Refit and balance

    Tyre remounted, wheel balanced and fitted back to the car.

01

Kerb rash, bent or cracked: three very different problems

Rim damage in Dubai mostly comes from two places: tight parking bays with high kerbs, and speed bumps or potholes taken at speed on low-profile tyres. The first scrapes the outer lip, the second bends or cracks the barrel. How we treat a rim depends on which one it is.

DamageWhat you seeCan it be repaired?
Kerb rashScrapes and gouges on the outer lip or spokesYes, cosmetic repair and refinish
Bent lip or barrelVibration at speed, slow air loss, visible flat spotUsually, by straightening, if the bend is not severe
Hairline crackSlow leak, crack visible with tyre removedGenerally replace. Welded alloys are a risk we do not take on structural areas
Cracked spoke or hub areaVisible crack near the centreNo. Replace the wheel
Corroded bead seatSlow leak with no punctureYes, cleaned and resealed
Our position on cracked rims

Some workshops weld cracked alloys. Welding changes the metal's strength around the repair and the crack can return without warning. On a car doing 120 km/h on the E11 we do not think that is worth it. We will tell you if a rim is cracked and recommend replacement.

02

Kerb rash repair

Most rim repair requests are kerb rash. The damaged area is sanded back, filled where the gouge is deep, primed and painted to match, then lacquered. On a standard silver or painted alloy, this restores the look and stops the bare aluminium corroding. It is cosmetic: it does not change how the wheel performs. Rash is easy to prevent by watching the passenger-side mirror when parallel parking, and tyres with a rim protector lip help too.

03

Diamond-cut and two-tone wheels

Many newer cars in the UAE, including Toyota, Hyundai, Kia, Lexus and several Chinese brands, come on diamond-cut alloys: a bright, machined face over a painted base. That face cannot be touched up with paint. The wheel has to go on a CNC lathe that skims a very thin layer of metal off the face, then it is lacquered again. Each wheel can only be skimmed a limited number of times before there is not enough metal left.

Painted or silver alloy

  • Spot repair possible
  • Usually same day
  • Lower cost, closer to the starting price

Diamond-cut alloy

  • Whole face re-machined on a lathe
  • Usually one to two days
  • Higher cost; limited number of re-cuts per wheel
04

Bent rims: why they matter more than they look

A bent rim often shows up as a vibration that balancing cannot cure, or a tyre that keeps losing air because the bead no longer seals around the bend. Low-profile tyres on 19 and 20 inch wheels protect the rim less, so bends are more common on performance cars and large SUVs. Straightening is done on a hydraulic machine at a partner centre: the rim is spun, the runout measured, and the bent section pressed back gradually. Afterwards the wheel must be balanced again; see wheel balancing.

If the car also pulls after the impact that bent the rim, the suspension may have taken a hit too, and a wheel alignment check is worth doing.

05

How rim repair works with mytyres.ae

Send clear photos of the damage on WhatsApp, including the inner barrel if you can see it. We give an initial view and a starting quote. Rim repairs are done at a partner centre because they need a lathe, a straightening machine or a spray booth. If the car is not drivable, the mobile van can fit your spare and take the wheel to the centre for you.

  • Tyre removed with care for the tyre pressure sensor, which sits on the inside of the valve hole.
  • Rim inspected off the car under light for cracks the eye misses when it is fitted.
  • Repair carried out and, for paint, given time to cure.
  • Tyre refitted, wheel balanced and refitted to the car.
06

Rim repair cost in Dubai

Rim repair starts from AED 150 per rim for cosmetic kerb rash on a standard painted alloy. It is a starting price; the final quote depends on the finish, the size and whether the rim is bent.

Cosmetic kerb rash
From AED 150 per rim
Diamond-cut refinish
Higher, quoted from photos
Straightening
Quoted after the rim is checked on the machine
Cracked rim
Replacement recommended

We do rim repair across Dubai, Sharjah and Abu Dhabi through partner centres, for example in Al Quoz, Sharjah Industrial Area and Mussafah. Other damage types are explained in causes of tyre damage.

Pricing

Rim Repair price

Starting priceAED 150per rim

Not the final price. Your quote depends on tyre size, brand and location and is confirmed before any work starts.

What can change the price

  • Diamond-cut or two-tone finishes that need a lathe
  • Straightening a bent rim, or more than one bend
  • Full refurbishment or colour change rather than spot repair
  • Rim size and how many wheels are done together
Dubai call-outAED 70
Sharjah call-outAED 70
Abu Dhabi call-outAED 100
Al Ain call-outAED 200

All prices AED incl. VAT. See every service price or tyre prices by size.

We come to you

Home, office, basement car park or roadside across three emirates.

Price before work

Starting prices online, your full quote on WhatsApp before we start.

Straight answers

If a tyre cannot be saved safely, we show you why instead of patching it.

Pay your way

Cash, card, or split into four with Tabby or Tamara.

Rim Repair: questions

How much does rim repair cost in Dubai?

Rim repair in Dubai starts from AED 150 per rim for cosmetic kerb rash on a standard alloy. Diamond-cut refinishing and straightening a bent rim cost more and are quoted after inspection.

Can a cracked rim be repaired?

We do not recommend repairing cracked alloy rims. Welding weakens the metal around the repair, so we advise replacing a cracked rim, especially one in a structural area near the spokes or hub.

Can a bent rim be fixed?

Yes, most bent rims can be straightened on a hydraulic machine if the bend is not severe and there are no cracks. The wheel then needs balancing.

How long does car rim repair take?

Cosmetic kerb rash repair is usually done the same day. Diamond-cut refinishing and straightening usually take one to two days.

Can diamond-cut wheels be repaired?

Yes, on a CNC lathe that skims the face and then re-lacquers it. Each wheel can only be re-cut a limited number of times.

Will rim damage fail the RTA test?

Cosmetic kerb rash does not normally fail inspection, but a cracked or badly bent wheel that affects safety can. Tyre condition is also checked at the same time.

Book rim repair today

WhatsApp a photo of your tyre or your car model. We reply with a value, mid-range and premium option, fitted where you park.

Chat on WhatsApp
Call now WhatsApp